Getting Your Siempelkamp Board Drying Right (Without Overpaying)
If you’re running Siempelkamp drying systems, you know the struggle. You need the heat to hit exactly right—no warping, no uneven curing, just a perfect board. Most people just bite the bullet and pay the massive markup for OEM lamps. But here’s the thing: the physics of shortwave infrared (SWIR) heating doesn’t care about a brand name. It only cares about the tungsten filament and the quartz envelope. That’s why we build our lamps to those exact same specs. You get the performance you need without the “brand tax.” Let’s talk power. To get that heavy-duty heat density, we tailor the wattage to your specific power rail. Whether you’re on a 230V or 400V system, we focus on the watt-per-centimeter ratio. High voltage is great because it lets us push more power through the tube without frying your circuitry. It feels the same and cures the same as the originals. Just do me a favor: double-check that your control transformers can handle the wattage. You don’t want a premature burnout on your hands. The hardware side of things We use heavy-wall quartz glass. Why? Because these things go through a lot of thermal shock when they cycle on and off, and cheap glass just won’t cut it. And if you’re worried about scorching the top layer of your boards, we’ve got you covered. We offer coated quartz that shifts the wavelength, pushing the heat deeper into the board instead of just searing the surface. As for the fit, we use standard R7s or Sk15 connectors. They just slide right in. No rewiring, no modifying the housing, no headaches. A few real-world tips These lamps put out a massive amount of heat. Because they run so hot, the quartz is actually pretty sensitive. **Whatever you do, don’t touch the glass with your bare hands.**The oils from your skin create tiny hot spots that can cause the tube to crack. Grab some lint-free gloves before you start the install. One last thing: be obsessive about the length and voltage. If they’re even slightly off, you’ll either end up with under-cured boards or a blown filament in a matter of hours. Get the match right, and you’re golden.